• Full sterilization in only 12 minutes.
• Interchangeable compartment allows you to sterilize according to your needs.
• Keep items sterile for 24 hours without removing lid after sterilized.
• Holds up to 2 wide neck or slim neck nursing bottles.
• Microbiologically proven to kill harmful bacterial effectively.
• Up to 15 months warranty.
• View the instruction manual here.

How To Use

How To Clean 
After using, switch off the power plug and remove it from the power source. Remove remaining residues from the equipment and dry clean with a piece of clean cloth. Do not immerse the Heating Base in water. Use a piece of soft clean cloth to gently wipe dry the all the parts and lid cover. It is recommended to clean your sterilizer once in every 3 days. The filter can be removed and rinsed clean with water once a week. Make sure the filter is completely dry before inserting it back. To prevent damage to the appliance, do not use alkaline cleaning agents. When cleaning, use a soft clean cloth and a liquid cleanser.

How to Maintain
Mineral residues may deposit on the heating plate after a few sterilization cycles. To avoid limescale from building up, wipe the surfaces with a soft clean cloth after each use.

Basic Maintenance (Using Lemon Juice Method)
1. Extract 160ml of lemon juice into a cup.
2. Pour onto the heating plate without boiling. DO NOT start any cycle of the sterilizer.
3. Leave it on for 30 minutes.
4. Use a soft clean cloth to remove remaining limescale.
5. Rinse with a cup of clean water and use a soft dry clean cloth to wipe dry.

Monthly Maintenance (Using Vinegar Method)
1. Mix 20ml of water and 10ml of vinegar into a cup.
2. Pour the solution on the heating plate & cover the sterilizer with the lid cover. Do not place other parts (bottle or accessories compartment) during descaling.
3. Press the Button to boil for 1 minute 30 seconds.
4. Switch off the main power & leave the sterilizer for 30 minutes.* Caution : Combined mixture is hot.
5. With a clean soft cloth, wipe off any stains or limescale.
6. Drain & rinse sterilizer to wash away vinegar solution.
7. Pour 50ml of clean water and run a full sterilization cycle.
8. Switch off the main power, rinse and wipe clean the sterilizer.