What’s in the Package
- 1 x StarTouch™ Cup 250ml
- 1 x Adaptor (Lid, Screw Cap with Handle)
- 1 x Straw Top
- 1 x Straw Connector
- 1 x Gravity Ball Straw
Product Description & Key Features
- The short upper straw tip reaches only the front of your baby’s tongue, encouraging proper tongue lifting and a mature swallowing pattern.
- Tactile sensory bumps on the straw tip guide your baby toward proper lip rounding and closure.
- The spill-free EasyDrink Valve allows smooth, effortless sipping without hard suction or biting, while preventing leaks between sips.
- The 360° Gravity Ball Straw follows the liquid, letting your little one drink comfortably from any angle, even when the cup is tilted or inverted.
- The included adapter and straw set is also compatible with 240ml SofTouch™ Nursing Bottles (PP, PPSU, and T-Ester)**.
- Attributed with 20% SCC mass balance certified Biomass-PP* to reduce reliance on non-renewable virgin plastics and create a more baby-friendly world.
* For the handle, lid and connector only, mass balance approach.
** Do not use StarTouch™ Adapter on Glass Bottle.
^ StarTouch™ Adapter and Straw Set for 300 / 330ml nursing bottles is sold separately.
How To Clean
- Before First Use: Disassemble all components and wash thoroughly. Place all parts in boiling water for 5 minutes to ensure proper hygiene. Always wash your hands with soap before cleaning, sterilizing, and feeding.
- After Each Use: Disassemble and wash all parts thoroughly with Pigeon Liquid Cleanser, paying close attention to hidden crevices so no milk or liquid residue remains. Use a sponge brush for the cup and adapter, and the SofTouch™ Straw Brush for Gravity Ball Straw to clean the inside of the tubing, then rinse well with clean water.
For more information, please refer to the instruction manual.
How To Sterilize
Sterilization Method: Boiling, Steam, Chemical#, UV^
Always sterilize before every use.
| Part | Material | Heat Resistance |
| Bottle | Biomass Polypropylene (PP) 20%*, Polypropylene (PP) 80% | 110°C |
| Teat | Silicone Rubber 100% | 140°C |
| Cap, Hood | Biomass Polypropylene (PP) 20%*, Polypropylene (PP) 80% | 120°C |
* For the bottle / cap / hood only. Mass balance approach.
# Chemical Sterilization is possible for all parts except the Gravity Ball Straw.
^ It is recommended to replace the product when it starts to discolour and/or turn cloudy.
Usage Tip
- Take extra care if your child is teething, as biting can damage the straw top.
- Replace the Straw Top and Gravity Ball Straw every 2 months, or immediately if you observe any signs of wear, tearing, discoloration, or cloudiness.
Precaution
- Do not sterilize or heat the Gravity Ball Straw in a microwave oven.
- After boiling sterilization, the bottle will be hot. Be careful not to burn yourself.
- All grease or oil residue should be thoroughly removed before sterilising to avoid permanent staining of parts.
- Avoid putting hot or carbonated liquids in the cup. The air pressure inside the cup will Increase and leakages might occur from the tip of the straw.
- Avoid putting hot liquids in the cup as they may cause burns.
- Open and close the lid firmly. Improper handling of lid may cause leakages.






